Internet Authentication Service (RADIUS) Setup
1.
Select Start > Programs > Administrative Tools > Internet Authentication Service.
2.
Right-click on Clients, and select New Client.
3.
Enter a name for the access point, click Next.
4.
Enter the address or name of the wireless access point, and set the shared secret, as
entered on the Security Settings of the wireless access point.
5.
Click Finish.
6.
Right-click on
Remote Access Policies
, select
New Remote Access Policy
.
7.
Assuming you are using EAP-TLS, name the policy “eap-tls”, and click Next.
8.
Click Add...
If you don't want to set any restrictions and a condition is required, select
Day-And-Time-
Restrictions
, and click Add...
114
To Next Page
Loading...
Need help?
General
Weight and Dimensions
