179
Note—
To unbind all ACLs from an interface, select the interface, and click Clear.
4. Select an interface, and click Edit.
5. Select one of the following:
•
MAC Based ACL—Select a MAC-based ACL to be bound to the interface.
•
IPv4 Based ACL—Select an IPv4-Based ACL to be bound to the interface.
•
IPv6 Based ACL—Select an IPv6-Based ACL to be bound to the interface.
•
Permit Any Unmatched Packets—Select to enable/disable this action.
6. Click Apply. The ACL binding is modified, and the Running Configuration file is updated.
Note—If no ACL is selected, the ACL(s) that is previously bound to the interface are unbound.
To Next Page
Loading...
