20
Chapter 4 – System Management
System Information
To enter system information:
1.
Click Configuration > System Management > System Information.
2.
View or modify the system settings.
•
System Description—Displays a description of the device.
•
System Location—Enter the location where the device is physically located.
•
System Contact—Enter the name of a contact person.
•
System Host Name—Select the host name of this device.
o
Default—The default host name (System Name) of these switches is
switch123456, where 123456 represents the last three bytes of the
device MAC address in hex format.
o
User Defined—Enter the host name. Use only letters, digits, and hyphens.
Host names cannot begin or end with a hyphen. No other symbols,
punctuation characters, or blank spaces are permitted (as specified in
RFC1033, 1034, 1035).
3.
Click Apply to save the values in the Running Configuration file.
To Next Page
Loading...
