192
•
Q
ueue—Packets were forwarded or tail dropped from this queue.
•
Drop Precedence—Lowest drop precedence has the lowest probability of being
dropped.
•
Total Packets—Number of packets forwarded or tail dropped.
•
Tail Drop Packets—Percentage of packets that were tail dropped.
2. Click Add.
3. Enter the parameters.
•
Counter Set—Select the counter set.
o
Set 1—Displays the statistics for Set 1 that contains all interfaces and
queues with a high DP (Drop Precedence).
o
Set 2—Displays the statistics for Set 2 that contains all interfaces and
queues with a low DP.
•
Interface—Select the ports for which statistics are displayed.
o
Port—Selects the port on the selected unit number for which statistics are
displayed.
o
All Ports—Specifies that statistics are displayed for all ports.
•
Queue—Select the queue for which statistics are displayed.
•
Drop Precedence—Enter drop precedence that indicates the probability of being
dropped.
4. Click Apply. The Queue Statistics counter is added, and the Running Configuration file is
u
pdated.
To Next Page
Loading...
