48
o
Log Server IP Address—Enter the IP address of the log server if it is to
be identified by address.
o
Log Server Name—Enter the domain name of the log server if it is to be
identified by name.
•
Server Settings
o
UDP Port—Enter the UDP port to which the log messages are sent.
o
Facility—Select a facility value from which system logs are sent to the
remote server. Only one facility value can be assigned to a server. If a
second facility code is assigned, the first facility value is overridden.
o
Description—Enter a server description.
o
Minimum Logging Level—Select the minimum level of system log
messages to be sent to the server.
4.
Click Apply. The SYSLOG server is added, and the Running Configuration file is updated.
RAM Log
The RAM Log page displays all messages that were saved in the RAM (cache) in chronological
order. Entries are stored in the RAM log according to the configuration in the Log Management
page.
Click Configuration > System Management > Logs > RAM Log.
•
Log Index—Log entry number.
•
Log Time—Time when message was generated.
To Next Page
Loading...
