Linksys LGS308

92
To configure Telephony OUI on an interface:
1. Click Configuration > VLAN Management > Voice VLAN > Telephony OUI Interfaces.
2. To configure an interface to be a candidate port of the telephony OUI-based voice VLAN,
click Edit.
3. Enter the values for the following fields:
•
Interface—Select an interface.
•
Telephony OUI VLAN—If enabled, the interface is a candidate port of the
telephony OUI based voice VLAN. When packets that match one of the configured
telephony OUI are received, the port is added to the voice VLAN.
•
QoS Mode—Select one of the following options:
o
All—QoS attributes are applied on all packets that are classified to the
Voice VLAN.
o
Telephony Source MAC Address—QoS attributes are applied only on
packets from IP phones.
4. Click Apply.