6
2.
Wait for the light on the front of your range extender to blink orange before going to
step 3. This can take up to a minute.
3.
Extend your network.
a.
Press the WPS button on your router.
Within the next two minutes complete step
3b.
b.
Press the WPS button on the side of your range extender.
The light on the front of your range extender will blink blue.
Watch the light to
verify whether the connection was successful.
If it turns solid blue , the connection was successful. Move to step 4.
If it blinks orange , the connection failed. You can try again by
repeating step 3 or try browser-based setup on page 9
.
To Next Page
Loading...
Need help?
General
