Linksys VELOP MX5500 Series User Manual

23
Advanced Settings
Internet Settings
You can choose how your Velop system connects to the internet. The default is Automatic
Configuration – DHCP. Other connection types depend on your internet service provider or how you
plan to use your Velop system. Advanced users can use Additional Settings to clone MAC addresses
and set MTU (maximum transmission unit).

Linksys VELOP MX5500 Series Specifications

General

Processor	1.4 GHz Quad-core
Memory	512 MB RAM, 512 MB Flash
Security	WPA3, SPI Firewall
Mesh Technology	Yes
MU-MIMO	Yes
OFDMA	Yes
Beamforming	Yes
Guest Network	Yes
App Support	Linksys App
Wi-Fi Technology	Wi-Fi 6
Wi-Fi Bands	2.4 GHz, 5 GHz
Coverage	Up to 3000 sq ft per node
Number of Nodes	1-3
Ethernet Ports	2 Gigabit Ethernet ports per node
WAN Ports	1 Gigabit WAN port per node
Parental Controls	Yes (via Linksys app)
Power Supply	100-240V, 50-60Hz