Linksys VELOP MX5500 Series User Manual

4
Back
Ethernet ports—Connect ethernet cables to these Gigabit ethernet (10/100/1000) ports and to
other wired devices on your network. If you have more than one node in your Velop system, use one of
these ports to connect to your modem or modem-router.
Note—For best performance, use a CAT5e or higher rated cable on the Ethernet port.
Internet port—Connect an ethernet cable to the yellow gigabit (10/100/1000) port, and to a
broadband internet cable/DSL or fiber modem. If you are using this router as a child node in a mesh
Wi-Fi system, you can use this port to create a wired connection to another node.
Power port—Connect the included AC power adapter to this port.

Linksys VELOP MX5500 Series Specifications

General

Processor	1.4 GHz Quad-core
Memory	512 MB RAM, 512 MB Flash
Security	WPA3, SPI Firewall
Mesh Technology	Yes
MU-MIMO	Yes
OFDMA	Yes
Beamforming	Yes
Guest Network	Yes
App Support	Linksys App
Wi-Fi Technology	Wi-Fi 6
Wi-Fi Bands	2.4 GHz, 5 GHz
Coverage	Up to 3000 sq ft per node
Number of Nodes	1-3
Ethernet Ports	2 Gigabit Ethernet ports per node
WAN Ports	1 Gigabit WAN port per node
Parental Controls	Yes (via Linksys app)
Power Supply	100-240V, 50-60Hz