Linksys WRT54GS User Manual

66
Chapter 7: Using the Linksys Parental Control Service
Signing up for the Linksys Parental Control Service
Wireless-G Broadband Router with SpeedBooster
Signing up for the Linksys Parental Control Service
To sign up for your Linksys Parental Controls account, you will need an active Internet connection. Then follow
these instructions:
1. After you click Linksys Parental Control Service from the Setup Wizard or the Sign Up for Parental Control
Service button from the Web-based Utility, the Linksys Service Agreement screen will appear. You must scroll
down the entire agreement before you can accept the Agreement. Then click the Accept button. If you do not
want to accept the Agreement, click the Cancel button.
2. The Sign Up screen will appear. Enter a User Name and Password for your account. Enter the Password again
in the Confirm Password field. Then enter your e-mail address in the Email field (service e-mail notifications
will be sent to this e-mail address) and enter it again in the Confirm Email field.
You have a choice of two payment plans, Pay Now or Pay Later. (If the Router you are using is not eligible for
the free trial, then you have one choice, Pay Now.)
If you click Pay Now, go to step 3.
If you click Pay Later, go to step 4.
Figure 7-4: Sign Up
Figure 7-3: Linksys Service Agreement
Note: Your screens may look different than the
figures shown in this chapter.

Linksys WRT54GS Specifications

Power

power supply	External, 12V DC, 0.5A
RF power output	18 dBm

Operating Environment

operating temperature	32ºF to 104ºF (0ºC to 40ºC)
storage temperature	-4ºF to 158ºF (-20ºC to 70ºC)
operating humidity	10~85% Non-condensing
storage humidity	5~90% Non-condensing

Weight and Dimensions

dimensions	7.32” x 1.89” x 6.06” (186 mm x 48 mm x 154 mm)
weight	13.58 oz (385 g)