Page 4 of 18 FA69352–2 English
Jun 2013
18
How To Create a Sequential Number
Linx 5900 & 7900
3 Create a Sequential Number
This example shows how to create a Sequential Number field that contains the range 001 to
999.
To create the field, perform the following steps:
1 At the Print Monitor page, select Message Store > New to display the Message
Editor page with a new, blank message.
Figure 2. Message Editor page
2 Press the Sequential Number key to display the Insert Sequential Number page.
Figure 3. Insert Sequential Number page
This page shows the default values for the new range. The number has one digit
and the range starts at 0 and ends at 9.
NOTE: Only the Start and End options are used in this example. The other options
on this page are described in the next section (see ‘Sequential Number
configuration’ on page 11).
69009
69318
To Next Page
Loading...
