LION ATTACK - 9. EXTINGUISHER TRAINING WITH ATTACK

ATTACK
™
DIGITAL FIRE TRAINING SYSTEM
24
WWW.LIONPROTECTS.COM
9. EXTINGUISHER TRAINING WITH ATTACK
™
WARNING
This appliance uses a Class 3R laser module. Do not alter laser module in
any manner. Do not look directly into beam or view with telescopic devices.
Do not direct laster at any person.
TRAINING EVOLUTION PREPARATION
1. Ensure that ATTACK is set up per the instructions in the section titled, “Setting Up
The ATTACK Base Unit For Use With A Hose line”. The weighted base does not
need to be lled with water. Do not place any sharp or jagged objects into the water
reservoir to avoid tearing the lining.
2. If training using a “BullsEye
™
laser extinguisher”, ensure that the BullsEye
™
laser
extinguisher is charged and turned on.
3. If training using “Water Can” mode, ensure that the SmartExtinguisher
®
or water can is
properly charged with water and air.
4. Ensure that no personnel or items are in the vicinity of ATTACK.
5. Ensure that the trainee is prepared to “extinguish” the re.
6. Ensure that the appropriate difculty and re class settings have been selected.