Lippert Components OneControl ConnectAnywhere - Product Activation; Cellular Gateway Activation Steps

Rev: 03.25.19 Page 8
CCD-0001447
Fig. 4
A
Product Activation
Cellular Gateway Activation
NOTE: Figures 4-6 shown without additional cabling for clarity.
1. Unplug the barrel connector power harness (Fig. 4A).
2. Remove the plastic SIM card adapter from the SIM card slot (Fig. 5A). Do NOT discard.
3. If using a standard size SIM card, insert the card into the card slot on the cellular gateway. Make sure
the SIM card's circuit is facing up and the card's notch is positioned in the upper right corner (Fig. 6A).
Fig. 5
A
Fig. 6
A
4. If using a nano SIM card, insert the nano SIM card into the SIM card adapter to create a standard SIM
card (Fig. 7).
Fig. 7
Assembled
SIM Card
SIM Card
Adapter
Nano
SIM Card