Rev: 03.25.19 Page 19
CCD-0001447
Fig. 28
A
9. If the system is off-line or cannot reach the Internet, the "GATEWAY OFFLINE" (Fig. 28A) web
page will display.
NOTE: Make sure the system is powered-up and that the unit's Internet connection
†
is working properly.
See the Troubleshooting section for more information.
Fig. 29
A
10. Scroll down to bring the dashboard into view (Fig. 29). Become familiar with the controls (Fig. 29A).
The web page controls have now been enabled. The unit can now be remotely controlled via the world-
wide-web.
Activate OneControl Mobile App ConnectAnywhere Remote Control Features
Before the OneControl mobile app can access the system, LCI Customer Community credentials must be
entered.
1. Make sure the mobile app is connected to the system via a local Wi-Fi connection using the built-in
setup wizard.
NOTE: This step must be completed before attempting to access ConnectAnywhere features.
2. Install the OneControl mobile app onto a mobile device. See the OneControl Mobile App Download to
Mobile Device section.
3. Launch the OneControl mobile app from the mobile device.
4. Locally, over Wi-Fi, run through the normal setup process to connect the app to the unit.
A. Run the connection wizard.
B. Choose a PIN to prevent unauthorized access to the app from the mobile device.
To Next Page
Loading...
Need help?
General
