Rev: 09.11.20 Page 2 CCD-0001360-AU
TABLE OF CONTENTS
Introduction 2
Safety 2
Preparation 3
Resources Required 3
Installation 4
Installing the Awning Rail (If Necessary) 4
Assembling the Awning 5
Mounting the Bottom Mounting Brackets 5
Mounting the Awning 6
Securing the Fabric 9
Installing the Stop Bolt 9
Introduction
The Solera® Classic Awning is designed for use on most recreational vehicle units and is available in a variety
of sizes to fit even the largest unit. Additional information about this product can be obtained from www.
lci1.com/support or by downloading the free MyLCI app.
The app is available on iTunes® for iPhone® and iPad® and also on Google Play™ for Android™ users.
iTunes®, iPhone®, and iPad® are registered trademarks of Apple Inc. Google Play™ and Android™ are
trademarks of Google Inc.
For information on the assembly or individual components of this product, please visit:
https://support.lci1.com/solera-classic-awning .
Note: Images used in this document are for reference only when assembling, installing and/or operating
this product. Actual appearance of provided and/or purchased parts and assemblies may differ.
Safety
Read and understand all instructions before installing or operating this product. Adhere to all safety labels.
This manual provides general instructions. Many variables can change the circumstances of the instructions,
i.e. the degree of difficulty, operation and ability of the individual performing the instructions. This
manual cannot begin to plot out instructions for every possibility, but provides the general instructions,
as necessary, for effectively interfacing with the device, product or system. Failure to correctly follow the
provided instructions may result in death, serious personal injury, severe product and/or property damage,
including voiding of the LCI limited warranty.
The “WARNING” symbol above is a sign that a procedure has a safety risk involved and may cause
death or serious personal injury if not performed safely and within the parameters set forth in
this manual.
Moving parts can pinch, crush or cut. Keep clear and use caution.
Failure to follow the instructions provided in this manual may result in death, serious injury, unit
damage, or voiding of the component warranty.