Rev: 10.13.21 Page 18 CCD-0004221
Troubleshooting
Relearn Sensors After Tire Rotation
If a tire rotation is performed on the vehicle, the user can relearn the sensors by utilizing the Learn All
Sensors mode.
Internal Sensors
When the battery voltage begins to approach 1.9V on a tire sensor, it is time to schedule a service
appointment to replace the sensor for that tire. If the battery is dead, the sensor assembly must be replaced.
The battery life is estimated to be three years.
NOTE: Use of tire sealant will cause damage to the internal sensor and may impact sensor readings.
Wrong Vehicle Chosen
In the event a wrong vehicle type is chosen, delete the incorrect vehicle from the Delete A Vehicle option in
the settings menu. See Delete A Vehicle section. Choose Add Another Vehicle to add a corrected vehicle. See
Add A Vehicle section.
Missing Stem Sensor
If a stem sensor becomes detached from the valve stem, or an issue has occurred to where the repeater does
not receive data from a sensor for an extended period of time, the repeater will flag the sensor as missing
and the tire’s readout button will display a “loss of communication” symbol (Fig. 47A).
Reattach the sensor, remove any metal obstructions directly in front of the repeater or replace the sensor
with a new one to resolve the issue.
Fig. 47
A
To Next Page
Loading...
Need help?
General
