Lippert Tire Linc User Manual

Rev: 10.13.21 Page 2 CCD-0004221
TABLE OF CONTENTS
Introduction 2
Key System Components 3
Safety 3
Preparation 4
Install Repeater 4
Place Repeater Into Pair Mode 4
Message To Power O Displays 5
Pairing and Conguration 5
Sensor Pairing 5
Sensor Pairing Sequence 7
Learn All Sensors 8
Congure All Thresholds 9
Learn A Sensor 10
Detach Vehicles 11
Re-Attach Vehicles 12
Delete A Vehicle 13
Add Another Vehicle 14
Replace Sensor 14
Display 15
Operation 16
Tire Limits Example 17
Changing Units of Measure 17
Troubleshooting 18
Relearn Sensors After Tire Rotation 18
Internal Sensors 18
Wrong Vehicle Chosen 18
Missing Stem Sensor 18
No Power 19
Reset Repeater 19
Reset LCD Handheld Display 19
Introduction
Tire Linc® is a tire pressure and temperature monitoring system (TPMS). The TPMS display issues an alert
when a unit's pressure or temperature falls out of the programmable range. The system is operated by a
handheld display, and a power cord and stand are included with the kit (Fig.1).
NOTE: If utilizing the LCD handheld display with the repeater, then neither the OneControl app nor the Tire
Linc Alert Indicator can be used with the repeater.
NOTE: Images used in this document are for reference only when assembling, installing and/or operating
this product. Actual appearance of provided and/or purchased parts and assemblies may differ.
For information on the assembly or individual components of this product, please visit:
https://support.lci1.com/tire-linc.
Do not use tire sealant with internal sensors. This will damage the sensor and void the warranty.

Lippert Tire Linc Specifications

General

Type	Tire Pressure Monitoring System (TPMS)
Compatibility	RV and Trailer tires
Battery Life	Up to 5 years
Operating Temperature Range	-40°F to 185°F (-40°C to 85°C)
Connectivity	Bluetooth
Accuracy	±1 psi
Wireless Range	Up to 100 feet
Mobile App	Yes (Android and iOS)
Display	Mobile App
Power Source	CR1632 battery