ISO 9001 CERTIFIED www.liteputer.com.tw
Lite-Puter
CX-12 [EUM-E]
20
STEP-7 key【0】,【1】for DIMMER097<=CH01, and press【ENTER】key to confirmed
the setting, the DIMMER097 had PATCH to CX-12
之
CH01
STEP-8 press【SET】to escape
STEP-9 press【F2】the save (4 set of setting available F1~F4 )
STEP-10 press【F1】to load the patch data from F1~F4
STEP-11 press【F4】to delete the date, and back to the default setting
8-3-2 Warm up setting 0~9%
STEP-1 press【SET】
STEP-2 and press【F3】
STEP-3 and press【F4】
F1/2/3/4=1/+/-/d
DIMMER097<=CH01
F1 : Load F3 : Edit
F2 : Save
F4 : Clear
F1 : Setup F3 : Patch
F2 : Xio
F4 : Lock
F1 : ALLCh
F2 : LoadSc
F4 :Clr
F3:DMXin
F2:DMXo F4:Wrmup
1.【F1】: to select all channel warm up setting
2.【F2】: SCENES loading
3.【F4】: to delete the last step scene setting
To Next Page
Loading...
Need help?
General