ISO 9001 CERTIFIED www.liteputer.com.tw
Lite-Puter
CX-12 [EUM-E]
19
8-3 Channel patch setting / warm up setting
8-3-1 Channel patch setting ( up to 4 set of setting )
EX
：
To patch DIMMER097channel to CH01 of CX-12
STEP-1 Press【SET】
STEP-2 and press【F3】
STEP-3 and press【F2】
STEP-4 and press【F3】
STEP-5 Press【F4】，for DIM staring address
STEP-6 Press【F1】for DIMMER097<=CH--
press【F1】to DIMMER 001
press【F2】DIM to + 1
press【F3】DIM to -1
press【F4】DIM address selection
1:97 2:193 3:289
DIMMER001<=
press【F1】DIMMER097
press【F2】DIMMER193
press【F3】DIMMER289
F3:DMXin
F2:DMXo F4:Wrmup
F1 : Setup F3 : Patch
F2 : Xio
F4 : Lock
F1 : Load F3 : Edit
F2 : Save
F4 : Clear
F1/ 2 / 3 / 4=1/ + / - /d
DIMMER001<=CH01
F1/ 2 / 3 / 4=1/ + / - /d
DIMMER097<=CH--
To Next Page
Loading...
Need help?
General