LiteOn EVO 8000 Series - Page 59

56
Table 5.1.1 Keypad Keys and Displays
No
Display
Name
Function
1
FN1 Key
User-defined function key for Quick Setting Mode
2
FWD/REV Key
Forward/reverse selection
3
RESET Key
 Moves the cursor to the right
 Resets the drive to clear a fault situation
4
RUN Key
Runs the drive
5
MENU Key
 Enters or exits the parameter group
 Switch the displayed menu
6
UP/DOWN Key
Selects parameter numbers, increments and
decrements setting value and frequency
7
STOP Key
Stops the drive
8
ENTER Key
 Enters parameter value, parameter and setting
 Enters parameter setting menu.
9
LO/RE Selection Key
Switches drive control between the keypad (LOCAL)
and an external source (REMOTE)
10
FN2 Key
Retain
11
RUN Light
Refer to Table 5.1.2.2
12
LO/RE Light
Refer to Table 5.1.2.2
13
RPM Light
Refer to Table 5.1.2.2
14
Hz Light
Refer to Table 5.1.2.2
15
Fault Light
Refer to Table 5.1.2.2