LiteOn EVO 8000 Series - Page 62

59
5.1.2.2 LED Indication
Table 5.1.2.2 LED Indication
Indicator Light
Lit
Blinking
Off
Drive in operation
 Drive in deceleration
 Output frequency below
the minimum frequency
Drive not in operation
Control from Local
Nil
Control from Remote
Displaying output speed
Nil
Nil
Displaying output
frequency
Nil
Nil
Fault operation
Nil
Normal operation
Communication
connected
Nil
Nil
Communication error
Nil
Nil
Allows Run commands
only from a remote
source
Nil
Allows Run commands
only from keypad
Rotating reversely
Nil
Nil
5.1.3 Keypad Programming
 Keypad Display Menu Structure
A. Standard setting mode: Press MENU to enter or exit the parameter group. Press ENTER,
MENU, UP, DOWN and RESET to monitor and edit settings.