LiteOn EVO600043S1D5E20F User Manual

166
Keypad
Display
Fault Name
Cause
Possible Solution
3. Feedback sensor
malfunction
FbL
PID Feedback Low
1. Incorrect parameter
settings
2. Incorrect PID feedback
wiring
3. Feedback sensor
malfunction
1. Reset b5-12 and b5-13
2. Correct the wiring
3. Check the sensor
bUS
Retain
CE
Modbus
Communication Error
1. Incorrect wiring
2. Communication data error
caused by noise
1. Correct the wiring
»Check short circuits and
disconnected cables, repair if
necessary
2. Check possible solution to
suppress the noise
CF
Retain
Err
Retain
JoGE
FJOG/ RJOG Input
Error
A FJOG and RJOG Run
commands are received at
the same time
Check the Run command from
the external source for Fjog/Rjog

LiteOn EVO600043S1D5E20F Specifications

General

Brand	LiteOn
Model	EVO600043S1D5E20F
Category	Controller
Language	English