LiteOn EVO600043S1D5E20F User Manual

172
Is the color changed by the heat？
 Replace the damaged components
 Replace the entire drive if necessary.
○
Any dust collection or stain?
 Affix the terminal block cover
 Remove the dust with a vacuum
cleaner
 Replace components if cleaning is not
possible.
○
9.2.5 Main Circuit
Inspection Points
Corrective Action
Inspection Cycle
Daily
6
months
12
months
Are the screws all tightened？
Replace the damaged screws or
terminals if tightening is not possible.
○
Any shape change, crack, damage or
color change at the components or
insulators because of heat？
Replace the entire drive if the board is
impossible to be repared or replaced.
○
Any dust collection or stain?
Remove the foreign material and dust.
○
9.2.6 Main Circuit- Terminals & Cables
Inspection Points
Corrective Action
Inspection Cycle
Daily
6
months
12
months
Any shape or color change at the
terminals or jumper because of heat？
Repair or replace the damaged cables.
○
Any damage or color change at the
cables？
Repair or replace the damaged cables.
○
9.2.7 Main Circuit- Capacitors
Inspection Points
Corrective Action
Inspection Cycle
Daily
6
months
12
months
Any liquid leakage, color change, crack
or swell?
Replace the entire drive if the
component is impossible to be
replaced.
○
Has the cap come off or swellen?
○
Measure the electrostatic capacity if
necessary
○

LiteOn EVO600043S1D5E20F Specifications

General

Brand	LiteOn
Model	EVO600043S1D5E20F
Category	Controller
Language	English