22
3.6 High Alarm
The “HIGH ALARM” screen allows programming of the High Con-
ductivity reading that activates an alarm LED and output relay.
Press “ENTER” from “HIGH ALARM” screen to change this value. The
setting will have a ashing cursor indicating that the value can be changed.
Press the “UP” or “DOWN” key to increase or decrease the setting. Press
“ENTER” to save the value.
HI ALARM 4000
High Conductivity Alarm Set Point
CONDUCTIVITY
SET POINT
LOW ALARM
HIGH ALARM
FEED
MANUAL OUTPUT
ADVANCED SETUP
TEMPERATURE
H
2
O METER
∆ DIFFERENTIAL
BOILER
HI ALARM 4000
(866) 433-6682 • (281) 359-8538 • sales@novatech-usa.com • www.novatech-usa.com
To Next Page
Loading...
Need help?
General
