Need help?Do you have a question about the lntercomp SW500 and is the answer not in the manual?
Overview of the various controls and buttons available on the SW500 indicator.
Details on voltage, battery type, battery life, filtering, and input/output specifications.
Information on the speed, accuracy, and division specifications for the scale system.
Specifies humidity and temperature ranges for storage and operation.
Dimensions and weight of the scale pads, indicator, and carrying case.
Details on aluminum and composite ramps for car access to weighing pads.
Information on the optional 9V NIMH rechargeable battery.
Details on optional tape printers, printer cables, and computer interface cables.
Information on replacement cables, available in multiple colors.
Illustrates the system setup configuration, including pad connections and cable assignments.
Step-by-step guide for initial setup and display format selection in normal operation.
Instructions for setting up and using the scale in HUB MODE for compensation.
How to adjust the display contrast for better readability.
Example display format for Oval Track racing, showing weights and percentages.
Example display format for CUP/NW, showing weights and percentages.
Example display format for Road Racing, showing selected weight and total.
Example display format for Dirt Track racing, showing weights, cross, and rear bite.
Example display format for Drag/Rally, showing front, rear, and total weights.
Example display format showing individual wheel weights and percentages.
Example display format showing the total weight on all pads.
Example display format showing total weight and individual pad weights.
Example display format for Kart Oval Track, showing weights and percentages.
Example display format for Kart Road Racing, showing selected weight and total.
Example display format for Kart Dirt Track, showing weights, cross, and rear bite.
Example display format for Kart Drag/Rally, showing front and rear weights.
Example display format showing individual kart wheel weights and percentages.
Example display format showing the total weight for kart scales.
Example display format showing total weight and individual pad weights for kart scales.
Instructions for turning the SW E-Z Weigh indicator on and off.
How to zero individual pads or all four pads, and how zeroing is remembered.
Explanation of the Auto Zero Tracking feature that corrects slight zero changes.
Instructions for turning the indicator's backlight on and off.
How to print the current screen or access printing options and baud rate settings.
How to clear memory locations or reset numeric entries.
Function of the STORE/ENTER key for saving setups and entering numbers.
How to view the difference between actual and target weights.
How to view the target weight setup for the car.
How to view the actual weight measured by the scales.
How to enter the Center of Gravity function for Standard or Vertical CG.
Using the numeric keypad for recalling target setups and entering numbers.
Function of the LF, RF, LR, RR keys for selecting/unselecting pads in Road Racing format.
Key combinations for switching units, enabling read-only mode, and entering HUB MODE.
How to change the display format from the power-up selection menu.
How to lock the display format to prevent changing it after power-up.
Instructions for storing up to 99 weight setups as target setups.
Steps for manually entering target weights using direct key-in, wedge, or target %.
How to enter target weights using total weight, left side %, rear %, and wedge %.
How to enter target weights using left front %, right front %, left rear %, and right rear %.
Instructions for recalling stored target setups from memory locations.
How to clear individual or all stored baseline setups.
How to calculate Standard CG by entering axle width and wheel base.
How to calculate Vertical CG by measuring car height and wheel base.
Description of the auto-off feature to save battery life.
Details on the data format and identifiers for multi-line continuous serial output.
Information on transmitting only the total weight continuously.
Wiring diagram for the 3.5mm stereo audio jack serial output connector.
Instructions for connecting and installing drivers for USB output to a computer.
How to select and use the Japan display version, including free and fixed scaling.
Explanation of the Free Scaling display format for automotive and kart scales.
Explanation of the Fixed Scaling display format for automotive and kart scales.
How to use the RF-LF cross display version and its output.
How to use the Motorcycle display version for specific weight and percentage readings.
Troubleshooting messages related to pad communication, capacity, and units.
Troubleshooting messages for low battery, EEPROM errors, and hub compensation status.
To Next Page
General