SW500 Wired Scale Systems, Users
Rev E,October, 2016
Page 21 of 36
Numeric keypad
In normal weighing mode this key is used to recall target setups. See section
titled ‘Recalling Baseline Setups’.
Use the numeric keypad when asked to enter a number. Press the number keys
to enter the number and press STORE/ENTER to complete.
LF, RF, LR, RR
These keys stand for left front, right front, left rear, and right rear. These keys
are used when in the Road Racing format. Pressing these keys toggles the
corresponding pad between select and unselect. If the pad is selected, an arrow
will be indicated to the left of the weight.
To Next Page
Loading...