FIGURE 12.11 SETTING THE TIMER PROGRAMS (ctd.)
C o p y f r o m : C H M o n
C o p y t o : C H T u e
Confirmation screen:
A r e y o u s u r e
< C a n c e l ; > C o n f i r m
Press [◄] to cancel the changes made (unit will reset).
Setting DHW program times:
P r o g r a m D H W
M o n 1 0 6 : 0 0 - 2 3 : 0 0
A r e y o u s u r e
< C a n c e l ; > C o n f i r m
Press [◄] to cancel the changes made (unit will reset).
Copy programmed day for CH:
Press [►] to switch between "Copy from" and "Copy to". The flashing day is
selected and can be changed.
> > > From previous page < < <
> > > Continued on next page < < <
Press [►] to browse through the values that can be set on the bottom line. The
flashing value can be changed.
Press [►] to confirm the changes. The last alternation will be flashing for a few
seconds and return to base menu.
Press [◄] for next SCREEN
Press [▲] & [▼] to change the selected (flashing) value.
Press [ENTER] for confirmation screen when all settings are done.
Press [►] to confirm the changes. The two days will blink for a moment.
Press [MENU] to exit. The boiler will reset and go to the operating screen.
Press [◄] for next SCREEN
Press [▲] & [▼] to change the selected (flashing) value.
Press [ENTER] for confirmation screen when all settings are done.
Press [MENU] to exit. The boiler will reset and go to the operating screen.
To Next Page
Loading...
Need help?
General