Lochinvar CP-M Series User Manual

63
FIGURE 12.19 SETTING MAINTENANCE ALERTS (ctd.)
Screen: Selecting message at certain date.
M a i n t e n M o d e
D a t e
Press [►] to set:
The date for the maintenance message.
Press [◄] to:
Return to maintenance mode selection.
Press [►] to browse through the values that can be set
at the bottom line.
The flashing value can be changed with [▲] & [▼]
Confirmation screen:
A r e y o u s u r e
< C a n c e l ; > C o n f i r m
Press [◄] to cancel the changes or [►] to confirm the
Screen: Message after total amount of ignition cycles.
M a i n t e n M o d e
I g n i t i o n c y c l e s
Press [►] to set:
The total amount of ignition cycles for the Maintenance message.
Press [◄] to:
Return to maintenance mode selection.
The flashing value can be changed with [▲] & [▼]
Confirmation screen:
A r e y o u s u r e
< C a n c e l ; > C o n f i r m
Press [◄] to cancel the changes or [►] to confirm the
> > > Continued on next page < < <
Press [ENTER] to confirm the changes.
changes. After the boiler returns to operating screen.
Press [ENTER] to confirm the changes.
changes. After the boiler returns to operating screen.
> > > From previous page < < <

Lochinvar CP-M Series Specifications

General

Brand	Lochinvar
Model	CP-M Series
Category	Boiler
Language	English