28
9 Annex
9.3 Declaration of EC Conformity
Declaration of Conformity
In accordance with the EC-Machine Directive 98/37/EEC
The Manufacturer
Henkel Loctite Deutschland GmbH
Arabellastrasse 17
D-81925 München
declares that the unit designated in the following is, as a result of its design and construction, in accordance with the
European regulations, harmonized standards and national standards listed below.
Designation of the unit Semi-automatic Dispense System
Unit number 97007/97008/97009/97010
Applicable EC Directives EC-Machine Directive 98/37/EC
Applicable harmonized standards DIN EN 292-1, 1991.11; DIN EN 292-2, 1995.06
Manufacturer’s signature
07/10/2001 General Manager (F. Löhr)
For changes to the unit that were not approved by Loctite, this declaration loses its validity.
Declaration of Conformity
In accordance with the EC Directive for
Electro-Magnetic Compatibility 89/336/EEC, Appendix I
The Manufacturer
Henkel Loctite Deutschland GmbH
Arabellastrasse 17
D-81925 München
declares that the unit designated in the following is, as a result of its design and construction, in accordance with the
European regulations, harmonized standards and national standards listed below.
Designation of the unit Semi-automatic Dispense System
Unit number 97007/97008/97009/97010
only in connection with footswitch 97201
Applicable EC Directive EC Directive for Electro-Magnetic Compatibility 89/336/EC in the
version 93/68/EC
Applicable harmonized standards EN 50011/3.1991; EN 50082-2/3.1995
Manufacturer’s signature
07/10/2001 General Manager (F. Löhr)
For changes to the unit that were not approved by Loctite, this declaration loses its validity.
To Previous Page
Loading...
