Dispensing5
34
Care, Cleaning and Maintenance6
The unit requires no special care and maintenance.
Cleaning
● Clean the drip funnel and dripcup as required.
● For periods of inactivity of more than 14 days or for changing of the product type,
clean the product hose and the dispensing valve.
☞
Use the recommended cleaning agents according to the operating instructions of the dispensing
valve.
Before loosening the cover screw fasteners, the reservoir must be depressurized
(pressure-free)! (see Section 5.1)
● Loosen the cover screw fasteners 2 and remove the cover 1.
Product residue on the hose!
● Clean product residue from the outside of the product hose.
5.3 Shutdown
● Disconnect the pneumatic supply from the unit.
Shutdown for Longer Periods of Non-use
For pauses in the work of longer than 14 days, place the system out of operation to prevent
curing of the product.
● Disconnect the pneumatic supply from the unit.
● Clean the product hose and dispensing valve according to Chapter 6.
5.4 Returning to Operation
● Reconnect the pneumatic supply.
Returning to Operation after Longer Periods of Non-use
● Check the installation according to Chapter 4.
● Return to operation according to Section 5.1.
To Next Page
Loading...
