- 122
english
Devices to the PC IN connection
You can connect a PC to the PC IN socket for example and thus use the
TV screen as a monitor.
➠ When connecting a PCs or accessory device to the PC IN socket of the
TV set, set the output signal on your PC first so that it matches one of
the signals in the table on page 145.
Connecting the device
Switch off all equipment before connecting.
Connect the device to the TV set’s PC IN socket with a VGA cable.
Connect the analogue audio signal of the PC to the AUDIO IN jack on
the TV set with a stereo cable.
Alternatively, connect the digital audio output of the PC or accessory equip-
ment to the AUDIO DIGITAL IN socket of the TV set with a cinch cable.
The digital audio input can be assigned to the PC IN socket by TV menu
ט
Connections
ט
Miscellaneous
ט
Assign digital audio input (see page
129).
If your PC has an HDMI interface, you can also connect the PC via the
HDMI socket to your TV set (see page 120).
Depending on the version of the HDMI connection on the PC, the audio
signal is also transmitted via the HDMI connection.
If this is not the case, connect the analogue or digital sound as described
above. See the appropriate operating manual for further information
about the version of the HDMI interface on your PC.
Playback from the device
Call AV selection.
Select PC IN socket,
OK switch over.
PC picture adjustment (only possible with certain signals)
In this menu you can set the position (vertical, horizontal) and the phase
length of your PC.
MENU: Call TV menu.
Select Picture,
go to the menu line below.
Select more ...,
OKcall.
Select PC IN display,
go to the menu line below.
Select the desired setting,
go to the menu line below.
Make settings.
Connecting units with component connection (YPbPr / YUV)
External units with component connection YPbPr (often informally re-
ferred to as YUV; see also Glossary on page 155) can be connected to
the PC IN socket of the TV set using a VGA adapter. The VGA adapter is
available as an accessory from your Loewe dealer.
The other units are connected as described in the left column.
OK
AV SELECTION
HDMI3
HDMI2
HDMI1
PC IN
AVS
AV
VIDEO
Switch to ...
External devices
Connection example of a PC
PC
PC IN
AUDIO
IN
TV set
Picture vertical Phase position
TV MENU
Picture
PC IN display
Picture horizontal
66
VGAAUDIO
To Next Page
Loading...
Need help?
General