To Next Page

To Previous Page

95 -

english

TV viewing with time shift

The Digital Recorder continuous operation is switched on as the factory

default setting (see page 93). In this case, the TV broadcast that you

wish to view is automatically recorded in the background. The maximum

time shift is up to 3 hours.

➠ Please also read the instructions on watching time-shifted television

on page 91.

➠ Programmes with copy protection (e.g. Macrovision) cannot be

watched with a time shift for legal reasons.

Interrupt

Press PAUSE button.

The TV image becomes a freeze frame and the DR status

display appears.

At the top you will see the number and name of the

station if EPG or teletext data are available, in addition

to the start and end of the current programme and the

title of the programme.

On the left hand side of the bar you can see the start time

for time shift recording. On the right hand side of the bar

you can see the time at which the time shift recorder will

be full (automatically extends by 30 minutes, up to a max.

3 hours). The bar shows the amount of available record-

ing capacity already used. The time displayed inside the

bar is the time at which the Pause button was pressed.

Continue (time shift viewing)

Press PLAY button.

You can now watch the TV programme with a time shift

from the time you pressed the PAUSE button. The Playback

symbolappears in place of the Pause symbol.

Jump to automatically set bookmarks

With time-shift television, and with the status display showing, you can

skip to automatically set bookmarks or to the start or end of the cur-

rent recording. White bookmarks mark the beginnings and endings of

broadcasts.

Red button: Jump back

Blue button: Jump forwards

Switch to live picture

Press STOP button.

You see the station’s live picture again.

Jumping

You can jump during time shift viewing by briefly pressing the buttons

  in the jump distance set; this enables you to skip uninteresting

sections quickly.

 Jump forwards.

 Jump backwards.

Smart Jump

If Smart Jump is activated, the jump width is halved every time you change

the jump direction. The jump width is doubled if you jump more than

three times in the same direction (max. 8 min.).

: Jump width corresponds to the jump width preset

in the Digital Recorder menu.

: Jump width is less than preset in the Digital Recorder

menu (e.g. after changing the jump direction).

: Jump width is greater than preset in the Digital

Recorder menu (e.g. after jumping three times in the

same direction).

For example, you are searching for the beginning of a broadcast that

has already started.

Press repeatedly to jump back.

If you have jumped past the beginning of the programme,

jump in the opposite direction:

 This jump in the opposite direction is only carried out

for half the jump distance. Jump forward using .

If you have jumped past the start of the programme:

Jump back again. In the process, the jump distance

is cut in half again.

By halving the jump distance when changing direction

again you can find your way to a specific place.

09:5609:45 10:00

Follow me

3KRHQL[6WHUHR܃