- 46
english
Explanations of the symbols in the status display:
General symbols:
t
Display in 3D mode (use Loewe Active 3D Glasses, see
accessories on page 148).
HbbTV mode is on and HbbTV applications are available
Transmitted audio signal:
0RQR Mono audio transmission analogue
VRXQG Two-sound transmission (Sound1/Sound2) analogue
1+1 Two-sound transmission (Sound1/Sound2) digital
6WHUHR Stereo sound transmission analogue
6WHUHR$$& Stereo sound transmission (HEAAC)
ܐ Stereo sound transmission digital (PCM)
۲
'LJLWDO Dolby Digital sound transmission (DD)
۲
'LJLWDO
+
Dolby Digital+ sound transmission (DD
+
)
۲'LJLWDO$$&
+
Dolby Digital AAC
+
sound transmission (HEAAC)
GWV dts sound transmission
03(* MPEG sound transmission
۲
3/,, Dolby Pro Logic II sound transmission
۲
965HI Dolby Virtual Speaker Reference display
۲
96:LGH Dolby Virtual Speaker Wide display
Transmitted audio channels:
܂ DD / dts 1.0 / mono
܆ DD / dts / MPEG 2.0
܉ DD / dts 3.0
܈ DD / dts 4.0
܋ DD / dts 5.0
܍ DD / dts 2.1
܅ DD / dts 3.1
DD / dts 4.1
ۿ DD / dts 5.1
Selected listening mode:
܃ Play centre sound or mono (left/right).
܃ Play front sound (L/R stereo).
܃ Play front and centre sound.
܃ Play front and surround sound.
܃ Play front, surround and centre sound.
➠ If the number of speakers appears in brackets, the
sound of missing speakers is transmitted by the exist-
ing speakers (virtual). The Dolby Virtual speaker (VS
mode) developed by Dolby is activated for the virtual
sound reproduction.
Status display
➠ In normal TV mode, without other displays.
INFO: Show status display.
In the upper two lines, you will see the number and name
of the station, the title and transmission time of the
programme currently showing (if available) and the sound
identification signal.
The bar (if available) indicates the progress of the current
programme.
If information about the current programme is available,
this can be called by pressing the INFO button again; in
this case the button on the right is displayed.
A menu (see page 47), the time and, if activated, the
alarm time and switch-off time appear at the bottom of
the screen depending on the DVB station.
The status bar is also shown automatically every time you
change channels.
The status bar is hidden automatically at the end of the
display time (see page 66 for setting).
If you want to hide the status bar manually before the dis-
play time ends, you can only do this with the END button.
'DV(UVWHሇᇀᇢ'LJLWDOᇳ
7RVNDQD
To Next Page
Loading...
Need help?
General