93 -
english
Settings
You can make a few settings in the Digital Recorder menu to adapt the
Digital Recorder to your requirements.
Call Digital Recorder menu
Call DR archive.
MENU: Call Digital Recorder menu.
Choose a setting,
switch to the menu line below.
Set or enter using the
numeric buttons of the remote control.
Explanation of the setting facilities
Select the storage medium whose accessible content is
to be displayed in the DR archive.
➠ The menu item only appears if several storage devices
are available (for external hard discs and TV devices
that are capable of permitting DR archive programmes
to be viewed on the network, see page 111 onwards).
If DR continuous mode is switched on, the programme
being watched is recorded permanently in the back-
ground.
Factory setting: on.
Adjust the recording quality for recording analogue pro-
grammes. This results in a change in the recording capacity.
Factory setting: high.
Explanation of the setting facilities (continue)
Display DR archive entries with or without covers.
For determining covers, see page 110.
Factory setting: With cover pictures.
➠ If you watch the broadcast during recording (e.g. for di-
rect recording), a cover will automatically be adopted.
A broadcast whose recording is running completely
in the background is initially saved without a cover.
If an entry has been hidden in an archive recording (see
page 105), you can be informed by a screen message
when skipping a hidden area.
Factory setting: yes.
Set the standard jump width (in minutes) used for jumping
forwards or backwards in the film by pressing or .
Use the numeric buttons on the remote control to enter
the time (always two-digit for 01 to 15 min.).
Factory setting: 04 min.
➠ If Smart Jump is activated, the jump width can only be
set between 1 and 4 minutes.
Activate or deactivate Smart Jump function (see page 95).
Factory setting: yes.
A broadcast programmed with the recording type Serial
is recorded only if it begins within the programmed start
time ± series recording tolerance. Use the numeric buttons
on the remote control to enter the time (always two-digit
for 01 to 60 min).
Factory setting: +-30 min.
➠ Serial recording tolerance is ignored when recording a
programme with auto time control (see page 101).
Select here whether subtitles are to be recorded in
continuous operation for DVB stations.
Factory setting: no
(1
.
The TV set can possibly already record decoded pro-
grammes in DR-continuous operation that have been
watched as time-shifted encoded programmes. Recording
the programme directly into the DR archive saves you
having to descramble it later.
Factory setting: no
(2
.
See page 94.
(1
for location of TV set DK, FIN, N or S: yes.
(2
for location of TV set NL: yes.
Select memory
medium
DR continuous
operation
Recording
quality
DR archive
view
Inform about
hidden
sections
Jump distance
Smart Jump
Serial
recording
tolerance
Record
subtitles at DR
continous
operation
Descrambling at
DR continuous
operation
DR+ Streaming
settings
TEXT
OK
۩
-
Top-Movie 1
15.09. Sky Cinema HD
Bon(n) jour Berlin
14.09. Phoenix
da capo
31.08. Das Erste
Tagesschau
29.07. 3sat
Individual
00.00. LOEWE.
09:45 - 10:00
DR ARCHIVE free capacity 68:42 hrs
Edit/protect
Delete/copy
Change sorting
Detail View
Timer list
DR continuous operation Recording quali
DIGITAL RECORDER MENU
Select memory medium
Integrated hard disk
...
Digital Recorder
To Next Page
Loading...
Need help?
General