LOGICDATA DMP360 User Manual

DYNAMIC MOTION SYSTEM - SYSTEM MANUAL // PAGE 7
2.5 EXPLANATION OF SYMBOLS AND SIGNAL WORDS
Safety notices contain both symbols and signal words. The signal word indicates the severity of the hazard.
DANGER
Indicates a hazardous situation which, if not avoided, will result in death or serious
injury.
WARNING
Indicates a hazardous situation which, if not avoided, could result in death or serious
injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could result in minor or moder-
ate injury.
NOTICE
Indicates a situation which, if not avoided, could result in damage to the product
through electrostatic discharge (ESD).
NOTICE
Indicates a situation that will not lead to personal injury, but could lead to damage to
the device or the environment.
INFO
Indicates the protection class of a device: Protection Class III.
Protection Class III devices may only be connected to SELV or PELV power sources.
INFO Indicates important tips for handling the product.
2.6 LIABILITY
LOGICDATA products comply with all relevant industry standards, which are listed in the product's data-
sheet. However, risk can result from incorrect operation or misuse. LOGICDATA is in particular not liable for
damage or injury caused by:
• Improper product use
• Accidental usage
• Clear misuse/abuse of the Table System
• Disregard of the documentation
• Unauthorized product alterations
• Improper work on and with the Table System
• Operation of damaged products
• Normal wear and tear of the Table System or its components
• Wear parts
• Improperly performed repairs
• Unauthorized changes to the operating parameters
• Disasters, external inuence, and force majeure
The information in this documentation describes the characteristics of the system without assurances.
Resellers assume responsibility for the LOGICDATA products installed in their applications. They must en-
sure their product complies with all relevant directives, standards, and laws. LOGICDATA shall not be held
liable for any damage that is directly or indirectly caused by the delivery or use of this document. Resellers
must observe the relevant safety standards and guidelines for each product in the Table System.

LOGICDATA DMP360 Specifications

General

Brand	LOGICDATA
Model	DMP360
Category	Control Systems
Language	English