TOUCH FAMILY - OPERATING MANUAL // PAGE 28
8.4 TROUBLESHOOTING
Usually, malfunctions occur when Handsets are pressed while calibrating. If the Handset fails to function,
you will need to restart the system. To do this:
1. Unplug the Handset from the Control Box.
2. Plug the Handset back to the motor Control Box.
3. After a few seconds the Handset is ready for operation.
A list of common problems and their solutions can be found in the Operating Manual of the installed
Control Box.
8.5 DISPOSAL
All products in the TOUCH Family are subject to the WEEE Directive2012/19/EU.
• Dispose of all components separately from household waste. Use designated collection
points or disposal companies authorized for this purpose
To Next Page
Loading...
