Turning the TV On for the First Time
Connect the mains cable to the mains socket after you have 1.
completed all the connections.
Switch on the 2. POWER ON/OFF switch at the side of the TV.
At this stage, the TV switches to standby mode. The red LED
indicator will illuminate on the front panel of the TV.
In standby mode, press the3.
/ I button on the top panel of the
TV or the
button on the remote control to turn the TV on. The
red LED indicator will turn blue.
Always disconnect the TV from the mains socket when not in
use for a long period of time.
The
/ I button on the top panel of the TV or the button
on the remote control is only used for switching the TV into
standby, it does not disconnect the TV from the mains power.
To completely disconnect the mains power, please remove
the mains plug from the mains socket or switch off the
POWER ON/OFF switch.
The first time you turn the TV on, it will go straight into the 4.
FIRST TIME INSTALLATION menu. (If you have already installed
the TV using the Quick Start Guide, please go to the next step
“Selecting the Input Source” at the bottom of this page.)
Press the 5.
buttons to navigate the menu and change the settings.
Country Select the country where you will operate the TV.
Delete Program Select to delete the tuned channels in the TV.
Search Program Select to search automatically for analogue and
digital TV programmes.
Select 6. YES on the screen and then press the OK button on the
remote control to start the First Time Installation.
Select NO on the screen to cancel the First Time Installation.
A First Time Installation reminder will appear the next time you
turn on the TV.
Initial Setup
To mains socket
Selecting the Input Source
Press the 1. SOURCE button to display the input source list.
Press the 2.
buttons to select the input source that you want:
DTV / TV / AV / S-VIDEO / SCART / YPBPR / HDMI / PC.
Press the 3. OK button to confirm your selection.
To Next Page
Loading...
Need help?
General
