GB-25
PreparationConnectionsInitial SetupUsing the FeaturesDVR (Digital Video
Recorder)
Using the Features
via USB port
Hints and Tips, Specification
and Safety Warnings
The Auto Tuning screen will pop up. Press the 2. buttons to select YES and
then press the OK button to start the auto tuning.
If you stop the tuning before it has finished, the TV will report it
as a no signal error. This is normal because all previous channel
memory has been cleared before tuning is carried out.
Customising the TV Setting (TV Mode)
Country
Allows you to select the country where you are using the TV.
Press the 1. MENU button and then use the
buttons to select the TV menu
and then press the
button.
Press the 2.
buttons to select COUNTRY.
Press the 3.
buttons to select the country: UK, Italy, Spain, France, Germany
and Other.
You may now proceed to the Auto Tuning or Manual Tuning.4.
Auto Tuning
Use this to automatically find and store all available channels. This is normally recommended if some channels have been added/
removed by the broadcaster or you have moved house.
In the 1. TV menu, press the
buttons to select AUTO TUNING and then
press the OK button or the
button.
To Next Page
Loading...
Need help?
General
