Logik L19DIGB10 User Manual

GB-26
Preparation Connections Initial Setup Using the Features DVR (Digital Video
Recorder)
Using the Features
via USB port
Hints and Tips, Specification
and Safety Warnings
Manual Tuning
Allows you to make manual fine tuning adjustments if the channel reception is poor under TV mode.
In the 1. TV menu, press the
buttons to select MANUAL TUNING and then
press the OK button or the
button.
Press the 2. buttons to change the following settings.
Channel To select a channel number for a particular
frequency through manual tuning.
Sound System To select TV sound system between: BG / I / DK / L.
(for AUTO & SECAM system only)
Colour System To select TV colour system between: AUTO / PAL /
SECAM. (not available for I sound system)
Auto Fine Tune
(AFT)
To fine tune the channel automatically when the
signal is weak.
Manual Tuning Performs manual search for analogue TV
programmes. Press and hold the
buttons
to adjust the channel frequency. Press the
buttons repeatedly to perform fine tuning.
Press the 3. MENU button to save the setting and return back to the previous
menu.
Press the 4. EXIT button to exit the menu.
Channel Edit
Allows you to edit analogue TV programmes in the Channel List.
Press the 1. MENU button and then use the
buttons to select the TV menu
and then press the
button.
Press the 2.
buttons to select CHANNEL EDIT and then press the OK
button or the
button.
To add a channel to the favourite channel list3.
Press the a.
buttons to highlight a channel and then press the GREEN
button.
Press the b. GREEN button again to undo it.
To Skip
Press the a.
buttons to highlight a channel and then press the
YELLOW button.
Press the b. YELLOW button again to undo it.

Logik L19DIGB10 Specifications

General

Brand	Logik
Model	L19DIGB10
Category	LCD TV
Language	English