LogikaControl LOGIK 26-S

Need help?

Do you have a question about the LogikaControl LOGIK 26-S and is the answer not in the manual?

Summary

CAUTION

ATTENTION

Important warnings regarding industrial use, safety regulations, and environment suitability.

TECHNICAL FEATURES

MAIN VISUALIZATION

Controller Buttons

Meaning of icons

Main Visualization Icons

M1 MAIN MENU

QUICK SETTING START;STOP PRESSURES

Adjusts start/stop pressures via password level 3.

M2 ENTER PASSWORD

M1-4 COMPRESSOR SETUP

M1-5 PRESSURES

M1-6 TEMPERATURES

M1-7 TIMER

M1-8 INVERTER RS485 (DANFOSS)

M1-9 ANALOG OUTPUT

M1-13 TIMER START;STOP

ALARMS

ALARMS WITH IMMEDIATE COMPRESSOR SHUT-OFF

Lists alarms causing immediate compressor shutdown with codes and causes.

ALARMS WITH COMPRESSOR SHUT-OFF AFTER 30 SECONDS UNLOAD RUNNING

Lists alarms causing shutdown after a 30-second unload run.

WARNINGS (VISUAL ALARMS)

HOW LOGIK 26-S CONTROLS THE COMPRESSOR

Motor Start Procedure

Step-by-step process for initiating motor start and compressor loading.

Safety Time Wt5 Operation

How the safety timer Wt5 manages compressor stops and restarts.

Solenoid Valve Operation (RL4)

Thermoregulation of the Fan (RL5)

INVERTER OPERATION

INVERTER CONTROLLED VIA ANALOG OUTPUT 4;20 mA

How the inverter is controlled using a 4/20mA analog signal for speed reference.

INVERTER CONTROLLED VIA RS485

How the inverter is controlled via RS485 MODBUS interface for communication and data exchange.

MASTER;SLAVE OPERATION

MASTER;SLAVE INVERTER (ONLY FOR LOGIK26 S, LOGIK33 S)

Specific setup for inverter-based master/slave configurations with Logik26S/33S.

MULTIUNIT OPERATION