Logitech Harmony Smart Control
28
13. Tap Done.
Adding Activities with MyHarmony
1. Select the Activities tab on the left hand side of the screen.
2. Click Add Activity.
3. Select the type of Activity to add. The choices available depend on the devices you have added. You can
add more than one of each Activity type.
NOTE: Most Activities fit into one of the specific Activity types offered. The Custom Activity type is
recommended only for home appliances. The Custom Activity does not provide Favorite Channels or
require roles for the device being added. Button assignments may not correctly reflect what is
expected for this Activity, but can be changed as described in How to map buttons to your remote.
4. Click Next.
5. Enter a name for the Activity.
6. Click Upload Icon to choose an icon from your system or accept the displayed icon. This icon will also be
used to represent your Activity on your Harmony Smart Control.
7. Click Next. The list of devices available for this Activity is displayed, with suggested devices checked.
8. Review the device list and clear any check boxes for unneeded devices.
9. Click the check the box for devices to add to this Activity.
10. Click Next.
11. Answer any questions about your Activity that MyHarmony asks.
12. Choose the input(s) for your Activity.
13. Review the settings for your Activity. The devices used are listed, along with the inputs and controls
used.
14. The devices that are not used are also shown at the bottom of the screen.
15. Click Done.
Viewing Activity settings
Viewing Activity settings with the Harmony App
1. Tap the icon.
2. Tap Settings.
3. Tap Edit Activities and Devices.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
