Need help?Do you have a question about the Loglift 96S CE and is the answer not in the manual?
General| Brand | Loglift |
|---|---|
| Model | 96S CE |
| Category | Construction Equipment |
| Language | English |
Certifies equipment meets cleanliness requirements for hydraulic systems according to ISO 4406.
Details manufacturer info and compliance with EU machinery directive 2006/42/EC.
Provides a general overview of the Loglift 96S crane's purpose and features.
Explains warning symbols (Danger, Warning, Caution, Note, Tip) used in the manual.
Instructions for identifying the crane's specific model and serial number details.
Identifies the primary structural components of the crane.
Details the crane's base, column, and slewing mechanisms.
Describes the boom structure and any attached lifting tools.
Explains the stabiliser extensions and legs for crane stability.
Lists and describes key hydraulic components of the operating system.
Identifies and explains buttons on the high seat control panel.
Details the features and adjustment controls for the premium high seat.
Overview of the cabin and its components.
Details the layout and functions of the C912 cabin control panel.
Details the layout and functions of the Hi-Cab control panel.
Lists fuse assignments and ratings for the C912 cabin.
Lists fuse assignments and ratings for the Hi-Cab.
Explains the main control valve and lever operation.
Describes the stabiliser control valve and its operation.
Specifies environmental and operational conditions for safe crane use.
Provides a table correlating wind force with potential damage and operational impact.
States the emitted noise levels of the loader cranes according to ISO standards.
Identifies and explains various safety signs and labels found on the crane.
Explains lifting capacity, load moment, load plate, and load diagrams.
Illustrates standard hand signals for crane operation.
Covers general safe practices for starting and using the crane.
Provides safety guidelines for using lifting accessories with the crane.
Outlines safety procedures for mounting and dismounting detachable cranes.
Explains the function and benefits of the crane's CE-safety system.
Identifies and illustrates the main components of the CE safety system.
Describes the stop button and indicator lamps on the CE system interface.
Details how to operate the crane controls from the high seat.
Describes manual crane operation using controls within the cabin.
Instructions for adjusting joystick height and angle on the high seat.
Instructions for adjusting joystick height and angle within the cabin.
Overview of the TimberTronics system for crane monitoring and operation.
Identifies the key components of the TimberTronics control system.
Explains the display unit functions and button operations for the TimberTronics system.
Introduction to the Multidrive2 system for crane operation.
Lists and describes the components of the Multidrive2 system.
Details the operation of Multidrive2 control levers and the display unit.
Explains the buttons and LED indicators on the Multidrive2 PDF box.
Step-by-step guide to safely starting crane operations.
Procedures for securely attaching the crane to the vehicle.
Instructions for operating the electric tiltable seat.
How to properly extend and set the stabiliser legs for operation.
Guidelines for ensuring proper ground conditions for stabiliser leg placement.
Safe operating procedures for lifting, slewing, and lowering loads.
How the slope indicator and control system function.
Guides on adjusting function speeds within the TimberTronics system.
Procedures for retracting and securing stabiliser legs for transport.
Instructions for operating the electric tiltable seat when ending use.
General procedures for safely ending crane operation and preparing for transport.
Specific steps for ending operation when the crane has a cabin.
Explains warnings from the TWI system regarding transport position.
Safe procedures for removing a console-mounted crane from a vehicle.
How to use the dump valve for emergency parking in case of system failure.
Outlines the conditions for Hiab warranty coverage for the crane.
Safety warnings and guidelines regarding service and repair work.
Emphasizes adherence to maintenance schedules and professional service.
Checklist for daily checks of critical crane functions and components.
Specific daily inspection points for the crane cabin.
Tasks for weekly inspection and maintenance of crane parts.
Additional weekly checks for the crane cabin.
Monthly maintenance tasks in addition to daily and weekly checks.
Additional monthly checks for the crane cabin.
Scheduled maintenance tasks to be performed twice annually.
Key maintenance procedures to be carried out once per year.
Additional annual checks for the crane cabin.
General guidelines and warnings for crane lubrication.
Illustrates lubrication points on the crane structure.
Specific instructions for lubricating the upper column bearing safely.
Details lubrication requirements for ball joints within the cabin.
Procedure for cleaning and greasing spring cups.
How to adjust the lateral clearance of boom sections.
Procedure for adjusting the tension of the telescope chain.
Maintenance and adjustment procedures for the cabin.
Instructions for adjusting the cabin's slide pad screws.
Guidance on tightening cabin screws and bolts.
How to check and refill the windshield wiper fluid.
Step-by-step guide for changing wiper blades.
Procedure for replacing LEDs on the control panel.
How to access and replace the cabin air filter.
Procedures related to the crane's hydraulic system.
How to check and change oil in the crane base and slewing housing.
Steps to remove air from the hydraulic system.
Detailed instructions for replacing the return oil filter cartridge.
Detailed instructions for replacing the high pressure filter cartridge.
Procedure for checking the hydraulic oil tank level.
Steps for safely changing the hydraulic oil and filters.
Guide for diagnosing and resolving common crane faults.
Table listing common crane faults, probable causes, and actions.
Troubleshooting specific faults related to the CE safety device.
Instructions for operating and stopping the diesel heater.
A table for recording crane's load capacity at different reaches.
Procedures for safely decommissioning and disposing of the crane.
To Next Page