PREFACE
Every attempt has been made to present within this service manual, accurate and up to date technical information.
However, development on the Lombardini series is continuos. Therefore, the information within this manual is subject
to change without notice and without obligation.
The information contained within this service manual is the sole property of Lombardini. As such, no reproduction or
replication in whole or part is allowed without the express written permission of Lombardini.
Information presented within this manual assumes the following:
1- The person or persons performing service work on Lombardini series engines is properly trained and equipped to
safely and professionally perform the subject operation;
2- The person or persons performing service work on Lombardini series engines possesses adequate hand and
Lombardini special tools to safely and professionally perform the subject service operation;
3- The person or persons performing service work on Lombardini series engines has read the pertinent information
regarding the subject service operations and fully understands the operation at hand.
GENERAL SERVICE MANUAL NOTES:
1- Use only genuine Lombardini repair parts. Failure to use genuine Lombardini parts could result in sub-standard
performance and low longevity.
2- All data presented are in metric format. That is, dimensions are presented in millimeters (mm), torque is presented
in Newton-meters (Nm), weight is presented in kilograms (Kg), volume is presented in liters or cubic centimeters
(cc) and pressure is presented in barometric units (bar).
To Next Page
Loading...
Need help?
General
