19
Engine oil
The generator has been shipped without
engine oil. Do not start the engine till fill
with the sufficient engine oil.
1、Place the generator on a level surface.
2、Remove the screws, and then remove
the cover.
3、Remove the oil filler cap.
4、Fill the specified amount of the
recommended engine oil, and then install
and tighten the oil filler cap.
5、Install the cover and tighten the screws.
Recommended engine oil:
SAE 10W -30
Recommended engine oil grade:
API Service SE type or higher
Engine oil quantity:
0.35 L (0.42 US qt,0.35 lmp qt)
To Next Page
Loading...
