34
4. Place an oil pan under the engine. Tilt the
generator to drain the oil completely.
5. Replace the generator on a level surface.
Do not tilt the generator when adding
engine oil. This could result in
overfilling and damage to the engine.
6. Add engine oil to the upper level.
7. Wipe the cover clean, and wipe up any
spilled oil.
Be sure no foreign material enters the
crankcase.
8. Install the oil filler cap.
9. Install the cover and tighten the screws.
Air filter
1. Remove the screws , and then remove the
cover .
Recommended engine oil:
SAE 10W -30
Recommended engine oil grade:
API Service SE type or higher
Engine oil quantity:
0.35 L (0.42 US qt, 0.35 lmp qt)
To Next Page
Loading...
Need help?
General
