LONCIN LC 2000i - Spark plug inspection


32
*1.....Initial replacement of the engine oil is after one month or 20 hours of
operation.
*2.....The air filter element needs to be cleaned more frequently when using in
unusually wet or dusty areas.
★….Since these items require tools, date and technical skills, have a LONCIN
dealer perform the service.
Spark plug inspection
The spark plug is important engine components, which should be checked
periodically.
1. Remove the cap  and spark plug cap  ,
and Insert the tool  through the hole from
the outside of the cover.
2. Insert the handlebar  into the tool  and turn it
counterclockwise to remove the spark plug.
3. Check for discoloration and remove the carbon.
The porcelain insulator around the center electrode
of spark plug should be a medium-to-light tan color.
4. Check the spark plug type and gap.
TIP
The spark plug gap should be measured with a
wire thickness gauge and, If necessary, to
Standard Spark Plug:
E6TC/E6RTC
BP6HS / BPR6HS (NGK)
L87YC /R L87YC (CHAMPION)
W16FP / W16FPR (DENSO)
W6BC / WR6BC (BOSCH)
If need EMC Certification, engine
must use E6RTC spark plug
Spark Plug Gap:
0.6-0.7mm
(
0.024-0.028in
)