LONCIN LC2000i - Generator Component Service

SECTION 4. DISASSEMBLY AND SERVICE
4-5 Generator
4-5-1 Fuel Tank
DISASSEMBLY/ REASSEMBLY
Gasoline is flammable and explosive,
drain the carburetor and fuel tube before
disassembly, spilled fuel must be wiped off
immediately.
REASSEMBLY:
Make sure the passages
are not clogged.
Check for fuel leakage
after installation.
FUEL COCK
REASSEMBLY:
Make sure that the air vent
hole is clean and
unclogged. Blow with
compressed air if
necessary.
REASSEMBLY:
Check to be sure the
strainer is clean,
undamaged and has
no obstructed mesh
before installation.
FUEL STRAINER
REASSEMBLY:
Wash the tank to
remove dirty sediment,
or water, and dry
thoroughly before
installation.
FUEL TANK
REASSEMBLY:
Check whether filter
element is clean and
whether it is damaged.
FUEL TANK CAP
FUEL FILTER
FUEL FILLER
RUBBER HOUSING
- 40 -