EasyManuals Logo

LONCIN LX250GY-3 User Manual

LONCIN LX250GY-3
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
VI Checking, adjustment and maintenance.
Check oil before driving. Check oil on flat ground which support by side stand, uprighting
the motorcycle, and oil gauge should be out of pouring orifice, and the level of oil should be within
upper and lower scale line.
Please use appointed senior grade lubricant.
-30
-22
-20
-4
-10
14
0
32
10 20 30 40
50 68 86 104
20W.50
10W.40 10W.50
10W.30
5W.40 15W.50
Oil is important for engine, so, periodic checking is necessary after the first 500km
change to engine special used oil after the first replacement, change each 2000km (Check oil
each 1000km and supplement).
Screw off oil drainage bolt and drain off oil when engine is hot.
Wash filtering screen of oil filter well installed after washing and then pour 1.2Ln new
oil start engine and idly rotate for 2 3 minutes.
Confirm the oil level is within upper and lower scale line after engine stopped for
minutes, make sure the motorcycle is uprighting.
Mixed using of types of oil with grades is not allowed for avoiding mechanical failure.
Replacement of machine oil
17
Machine Oil checking
The oil gauge
Lower scale line
Upper scale line

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LONCIN LX250GY-3 and is the answer not in the manual?

LONCIN LX250GY-3 Specifications

General IconGeneral
BrandLONCIN
ModelLX250GY-3
CategoryMotorcycle
LanguageEnglish