EasyManuals Logo

LONCIN LX250GY-3 User Manual

LONCIN LX250GY-3
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
Checking and replacement of air filter
1.Driving in dusty conditions, usual washing is needed, wait for periodic maintenance is not allowed.
2.Check crack on element before or at washing, in case crack was found, replace the element.
19
Caution:
This model is with waste gas nozzle, which improves the air flow and filtering efficiency.
The waste air nozzle connects to the Oil/Air Separator, and then to the engine's crankcase, that makes the waste gas from
crankcase enter the combustion chamber through the air filter to re-combust, for avoiding direct entry to atmosphere.
Take out the air filter for checking if it is dirty.
(Disassemble) Remove the air filter cover, screw off the bolt, and disassemble the air filter.
(Change) The air filter element must be changed if it is found dirty after 500~1000km's driving.
Caution Correctly install air filter element or the entry of impurity in engine may shorten the life of engine.No water entry in air filter
is allowed.No gasoline or cleaner with low fire point for element washing is allowed.
( )
( )
1
2
Clamp
Waste nozzle
(1)
(2)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LONCIN LX250GY-3 and is the answer not in the manual?

LONCIN LX250GY-3 Specifications

General IconGeneral
BrandLONCIN
ModelLX250GY-3
CategoryMotorcycle
LanguageEnglish