Periodic washing enables to prevent colour fading, also convenient for checking vehicle damage or oil leakage.
Caution High water pressure may damage parts, which shown as below
— Wheel hubs
— Exhaust pipe
— Fuel tank and lower part of seat
— Carburetor
— Head lock and ignition switch
— Mileage meter
(1) Motorcycle should be washed by pure water after scrubbed, clean up remaining dirt for preventing rust. Plastic parts
should be wiped up by cloth or sponge with neutral cleaning fluid and then wash by pure water.
(2) Dry the motorcycle in the air and then lubricate chain, and idly rotate for minutes.
(3) Repeatedly check brake system before driving, if necessary, immediate repair and adjustment is needed.
： ：
30
VII Motorcycle washing.
To Next Page
Loading...
Need help?
General